Hybrid SMA Connector Adapter | Kingfisher International

Overview

SMA 905 to SC Hybrid Adapter

Metal sleeve and rugged metal body
For use with POF fiber on any light source.
For use with PCS / glass fiber, on POF specific light sources and power meters.
Other instrument use not advised.

Note SMA 906 cannot be used with an alignment sleeve installed, so connector alignment may be very poor.

Key Features

Interchangeable connector adaptors

Use a single tester for: SC, LC, MPO, FC, HFBR, & other connectors - including universal & duplex options.

Metal-free connectors

To avoid metal dust fragments damaging your tester and fiber-ends, we use high-end metal-free connectors.

Documentation & Support

MPO MTP loss testing Connector types & characteristics More application notes...

Test standards and procedures
Warranty, compliance & quality
Instrument conformance
FAQ & troubleshooting
Customer support center

Applications

Recommended for these applications

Plastic optical fiber (POF, PCS, HCS, PMMI)

Test 1 mm plastic optical fiber, hard-clad or polymer-clad silica fiber (POF, PCS & HCS). Bare plastic fiber and many connector types supported.

Interchangeable connector adaptors

Metal-free connectors

Plastic optical fiber (POF, PCS, HCS, PMMI)

Pocket Power Meter KI 9600A Series

Handheld Power Meter KI 2600 Series

Pocket Fiber Source KI 9800A Series

Handheld Source KI 2400 & 2800 Series

Two-Way Loss / Length Test Set KI 27400 Series

Loss Test Set KI 2700 Series

Loss Test Set with Zero Warm-Up KI 2300 Series