POF Optical Test Light Source | Kingfisher International

Overview

This triple LED source is a special purpose test source for POF/ PCS systems at 470-520-660 nm. Typical applications include fiber optic attenuation measurement, polarity testing and fiber identification on critical systems.

Easy to use, rugged & versatile
Long battery life, micro USB power/charger
Interchangeable connectors with dust cap & tilt bail
Superior re-connection repeatability, < 0.1 dB
Excellent stability
Autotest & Multi-Fiber ID Tone generator
Full QA & test reports ISO/IEC 17025 traceable

Key Features

Interchangeable connector adaptors

Use a single tester for: SC, LC, MPO, FC, HFBR, & other connectors - including universal & duplex options.

Test tone with multi-fiber ID

Send & identify one of 12 unique test tones. Great for quickly verifying continuity, polarity and rack labelling.

One-touch AutoTest

Smart communication makes sure you always get a full, complete, and consistent test result.

Zero warm-up laser (KI2300, KI2400, KI23400 only)

Instant high-accuracy testing. Unlike other sources, Zero Warm-Up sources are in-spec & stabilized in seconds.

Metal-free connectors

To avoid metal dust fragments damaging your tester and fiber-ends, we use high-end metal-free connectors.

ILAC/NATA ISO/IEC 17025 Traceable Optical Calibration

Internationally recognised traceable optical calibration to ISO/IEC 17025

Genuine 3 year calibration validity

Genuine 3 Year optical power meter re-calibration validity

VisiTest option

Integrates a VFL into AutoTest, so the fiber end you need to test flashes red. Confidence with a quick & easy visual cue.

Multimode test standard compliance

Kingfisher LED sources meet Encircled Flux and CPR requirements straight out of the box.

Runs on Alkaline Batteries

SC / LC duplex support

Use our universal interchangeable connector options for duplex testing.

Legendary source stability

In real-world field conditions, Kingfisher's stable and accurate sources outshine the competition.

Specifications

KI2806 specifications

Output wavelength	Port 1: 470 nm LED / Port 2: 520 nm LED / Port 3: 660 nm LED

Output power	-7 dBm ±1 dB (@ 1 mm)

Adjust output power	Fixed

Short term stability (for 15 min, typical ±2 °C, after warm up, ORL < -25 dB)	0.01 dB

Stability over temperature	0.35 dB (typical)

Wavelength initial tolerance (@ 25 °C)	15 nm

Spectrum width (FWHM)	25 nm (typical)

General Handheld Source KI 2400 & 2800 Series specifications

Calibration validity (ISO/IEC 17025)	3 years

Modulated output	270 Hz, 1 kHz, 2 kHz ± 2 %, 12 Multi-Fiber ID tones

Autotest (not available for 470, 540 nm LED sources)	Compatible with KI Autotest power meter port & matching λ

Power	Battery / External power via micro-USB

Battery types	2x AA (LR6) Alkaline / 2x AA NiMH AA (rechargeable via micro-USB)

Battery life	Laser/LED source: 90/80 hours in Autotest, typical

Auto off	Selectable

Case	Polycarbonate (body) / rubber (edges & corners), moisture resistance, 1-meter drop tested

Size	190 mm x 105 mm x 35 mm

Unit weight	0.42 kg

Shipping weight	1.5 Kg

Operating / storage temperature	-15 to 55 °C / -25 to 70 °C

Relative humidity	0 ~ 95 %

Warranty	3 years

Documentation & Support

Brochure, KI 2800 KI 2400 General Purpose Brochure, KI-TK800 MPO Verifier KI 2000 Series - General Features Light Source Competitor Comparison KI 2000 Features & Demos - Playlist

Choosing between a source & meter, LTS, or two-way tester Which loss measurement wavelengths do I need? Some fiber optic test source characteristics Modal distribution How far can a VFL go? VFL distance and eye safety Locating cable faults More application notes...

KI 2800 KI 2400 - Quick Reference Guide KI 2800 KI 2400 - Quick Reference Guide (Multi Languages) KI 2000 Series - User Manual KI 2000 Series Light Source - User Training Slides KI 2000 - Declaration of Conformance KITS Reporting Software KI 2000 Firmware Updates

Applications

Recommended for these applications

Plastic optical fiber (POF, PCS, HCS, PMMI)

Test 1 mm plastic optical fiber, hard-clad or polymer-clad silica fiber (POF, PCS & HCS). Bare plastic fiber and many connector types supported.

Continuity and polarity testing

Fiber optic test equipment for polarity and continuity testing.

In the box

SC/SC Through Connector OPT046

Padded Canvas Carry Pouch OPT149

Soft pouch for two KI2000 series instruments. With carry straps and compartments for accessories storage.

Calibration Certificate ILAC/NATA Compliant

Quality Assurance Certificate

Instrument User Manual

Wrist Strap / Lanyard

USB Cable (Micro)

Optional accessories

LC Hybrid Connector Adapter OPT076

LC Simplex, metal body.

USD $51.51

In stock

Add to Cart

FC Hybrid Connector Adaptor OPT051

FC. OPT081 is preferred for power meters, since FC ceramic sleeves break easily.

USD $19.96

In stock

Add to Cart

ST Hybrid Connector Adapter OPT040

USD $19.96

In stock

Add to Cart

2.5 mm Universal Hybrid Connector Adapter OPT081

Universal 2.5 mm, including Duplex SC. Please observe application advice.

USD $94.53

In stock

Add to Cart

1.25 mm Universal Hybrid Connector Adapter OPT084

Universal 1.25 mm, including simplex LC. Please observe application advice.

USD $143.21

In stock

Add to Cart

1.25 mm Universal Hybrid Connector Adaptor OPT085

Universal 1.25 mm. Also fits: Duplex LC, Senko CS, SN duplex, and USconec MDC duplex connectors. Please observe application advice.

USD $165.05

In stock

Add to Cart

MU Hybrid Connector Adapter OPT080

USD $121.48

In stock

Add to Cart

LC / F3000 Hybrid Connector Adapter OPT072

For F3000 PC Simplex. This is an LC-PC adapter that also fits F3000. For LC-PC only use, OPT076 is better value and more robust.

USD $240.71

In stock

Add to Cart

E2000 Hybrid Connector Adaptor OPT060

E2000

USD $63.22

In stock

Add to Cart

LSA-DIN47256 AVIM Hybrid Connector Adapter OPT071

LSA / DIN47256

USD $41.99

In stock

Add to Cart

POF Multi-Connector Hybrid Adapter OPT077

POF Multi-Adapter for POF. For: HFBR all types, bare POF, Mini Toslink, 2.5mm, Versatile Link, Redlink. Ferrule sizes: 3.85, 3.5, 3.2, 2.55, 2.4, 2.3 mm x 8.5 mm deep. Please observe application advice.

USD $233.72

In stock

Add to Cart

HFBR Hybrid Connector Adapter OPT078

HFBR. For POF simplex / duplex / latching / non-latching / Versatile Link / Redlink connectors. Please observe application advice.

USD $119.22

In stock

Add to Cart

SMA Hybrid Connector Adapter OPT082

SMA. Please observe application advice

USD $108.71

In stock

Add to Cart

Semi-Rigid Carry Case for Test Kits OPT153-CASE

Semi-rigid canvas test kit case for two KI2000 or KI7000 series instruments, and three KI9000 series instruments. With carry straps and compartments for accessories storage. Moulded interior provides a perfect combination of durability, protection, and comfortable use.

USD $285.84

In stock

Add to Cart

Semi-Rigid Carry Case for Test Kits OPT154B

Semi-rigid canvas test kit case for two KI2000 series instruments, three KI900 series instruments, optical microscope & VFL pen. With cleaning materials, carry straps and compartments for accessories storage. Moulded interior provides a perfect combination of durability, protection, and comfortable use.