Fiber Optic Visual Fault Locator | Kingfisher International

Overview

A shirt-pocket size Visual Fault locator ideal for testing all fiber optic systems. 0.6 mW / 635 nm is a Class 1 eye-safe laser device, even with no fiber connected. For short distance applications, 635 nm gives a brighter light than a typical 650 nm laser. The interchangeable connector is easily replaceable if it is damaged, and is less likely to cause damage to other mated connectors, since a mated connector cannot be accidentally rotated. So this is overall a safer and more reliable fiber optic VFL than a pen-style device.

Rugged, drop-resistant construction
User defeatable auto turn-off
Lanyard, shirt pocket clip & padded pouch
Wink / CW function
Interchangeable connectors
Full QA reports with ISO9001 compliant calibration

Key Features

Interchangeable connector adpators

Use a single tester for: SC, LC, MPO, FC, HFBR, & other connectors - including universal & duplex options.

Test tone with multi-fiber ID

Send & identify one of 12 unique test tones. Great for quickly verifying continuity, polarity and rack labelling.

One-touch AutoTest

Smart communication makes sure you always get a full, complete, and consistent test result.

Metal-free connectors

To avoid metal dust fragments damaging your tester and fiber-ends, we use high-end metal-free connectors.

Multimode test standard compliance

Kingfisher LED sources meet Encircled Flux and CPR requirements straight out of the box.

Runs on Alkaline Batteries

TamperLock mode

Lock down user controls and configuration to reduce the risk of test failure.

SC / LC duplex support

Use our universal interchangeable connector options for duplex testing.

Legendary source stability

In real-world field conditions, Kingfisher's stable and accurate sources outshine the competition.

Specifications

KI9807A specifications

Output wavelength	635 nm VFL Laser

Output power (@ 9/125 µm, adjustable over 3 dB in 0.1 dB steps)	-2 dBm (0.6 mW) ±1 dB

Wavelength initial tolerance (@ 25 °C)	5 nm

Spectrum width (FWHM)	3 nm (typical)

Wavelength drift	0.1 nm /°C (typical)

Reconnection repeatability (95% confidence)	0.1 dB

General Pocket Fiber Source KI 9800A Series specifications

Calibration validity (ISO/IEC 17025)	3 years

Modulation	270 Hz, 1 kHz, 2 kHz ±2 %

Multi-fiber ID	12 fibers

Autotest	Compatible with KI Autotest power meter port & matching λ

Power	2 x AAA (LR-03) Alkaline

Battery life	Laser/LED source: 40/35 hours (typical) in Autotest

Auto off	Selectable

Case	Polycarbonate with captive dust cap, 2.5-meter drop tested

Size	124 mm x 81 mm x 25 mm

Unit weight	0.15 kg

Shipping weight	0.3 kg

Operating / storage temperature	-15 to 55 °C / -25 to 70 °C

Relative humidity	0 ~ 95%

Warranty	3 years

Documentation & Support

Applications

Recommended for these applications

Single mode fiber

Fiber Optic Test equipment for high bandwidth or long distance telecommunications testing.

Multimode fiber

Fiber optic test equipment for in-building LAN, ethernet, campus, industrial & education applications.

Mixed single mode & multimode fiber

Fiber testing equipment for cabling contractors & mixed systems.

PON / FTTx systems

Simple, cost effective PON / GPON / XGPON testers for last mile passive optical networks (e.g. for fiber to the home FTTH / FTTX equipment). Kingfisher's GPON test equipment is proven to help a smooth installation roll-out and ongoing FTTH fiber support.